6 Manual Trolley Hoist Built for Low Headroom, Confined Lifting, and Safety-Critical Environments

A hand-pulled trolley hoist is a commonly used manual lifting tool, usually for lifting and moving small objects. It consists of a trolley and hoist that can be operated to lift loads by manually pulling a chain or rope.

Manual Trolley Hoist Advantages:

• Portability: simple structure, easy to carry and install.
• Economy: Compared with electric hoists, hand-pulled trolley hoists are less costly and simpler to maintain.
• Safety: no power supply is required for operation, avoiding the risk of electrical failure.
• Wide range of application: can be used in factories, warehouses, construction sites and other occasions.

Types of Manual Trolley Hoists

0.5T-20T Integrated Manual Chain Hoist With Trolley

제품 특징:

• This series of hoists with rated loads of up to 3000kg are single chained and have lower headroom, making them particularly suitable for applications where space is limited.
• The trolley is easy to install and adjust and can be precisely adjusted to the width of the beam.
• Trolleys with a rated load of up to 5 tonnes can be set up in two basic standard sizes, the A-type trolley is suitable for I-beams with a greater width of 180 mm and can be easily converted to the B-type for I-beams with a greater width of 300 mm.
• The trolley wheels are designed to ensure a large track fit and the lubricated sealed ball bearings ensure good wheel operation.
• The trolley is equipped as standard with a tilt and fall arrest device.
• The IT trolley can also be purchased separately for the Yalelift 360 hand chain.

1T-100T Integrated Manual Chain Hoist With Trolley

The hoist trolley combination has extremely low headroom dimensions and can be adapted to a wide range of applications.

제품 특징:

• The hoists of this series with a rated load of up to 2000 kg have a single chain structure and lower headroom, which makes them particularly suitable for applications where space is limited.
• The trolley is easy to install and adjust and can be precisely adjusted to the width of the beam.
• Trolleys with a rated load of up to 5 tonnes can be set up in two basic standard sizes, A-type trolleys are suitable for I-beams up to a maximum width of 180 mm and can be easily converted to B-type for I-beams up to a maximum width of 300 mm.
• The trolley wheels are designed to ensure maximum track fit and the sealed ball bearings are lubricated to ensure good wheel operation.
• The trolleys are fitted as standard with anti-tilt and anti-fall devices.
• The integrated trolley can also be purchased separately for 0.5-100 tonne hand chain hoists.

Product options:

• Low headroom hoists for low spaces and special suspended lifting trolleys for all types of lifting and transporting 
• Optional chain straps (fabric bag or metal box) 
• Explosion-proof option 
• Corrosion-proof option 
• 과부하 보호 
• Trolley fixing to prevent unintentional sliding (especially suitable for use on board ships)

0.5T-20T Low Headroom Manual Chain Hoist With Trolley

제품 특징:

• The newly developed chain guide allows the lifting chain to be pulled from the side of the hoist body, almost level with the steel beam using the same integrated trolley as the Yalelift IT.
• The hoists in this series have a single chain for load ratings up to 3,000 kg.
• The trolley is easy to install and adjust and can be precisely adjusted to the width of the beam.
• The trolley can be set up in two basic standard sizes, the A-type trolley is suitable for I-beams up to 180 mm wide and can be easily converted to the B-type for I-beams up to 300 mm wide.
• The trolley wheels are designed to ensure a large track fit and the lubricated sealed ball bearings ensure that the steel wheels run well.
• The trolleys are equipped with fall and tilt protection as standard.

Low Headroom Rotating Manual Chain Hoist With Trolley

The rotatable low headroom trolley combination chain hoist offers extremely low headroom. Load ratings range from 0.25 to 6 tonnes in metric tonnes, with optional push or pull trolleys. The hoists are lightweight and combine all the features of the heavy-duty components of this product line.

The swivelling low headroom trolley combination chain hoist can travel within a very small turning radius without hitting or scraping the track. Due to the lightweight profile, the track can be built up close to the wall. The extremely low headroom is a cost-saving feature in existing or new building structures due to reduced roof height requirements.

This hoist is ideally suited to most single girder rail applications requiring low headroom, interlocking and turning, as well as other rail types.

1T-5T Low Headroom Manual Chain Hoist With Trolley

The ultra-low headroom integrated push or pull trolley combination is an upgrade of the hoist range for even lower headroom requirements.

제품 특징:

• Newly developed chain guide for pulling the lifting chain from the side of the hoist body, almost level with the steel beams
• Use of integrated trolley
• The hoists of this series with rated loads up to 2000 kg are of single chain construction. The trolley is easy to install and adjust and can be precisely adjusted to the width of the beam.
• The trolley can be set up in two basic standard sizes. The A-type trolley is suitable for I-beams up to a maximum width of 180 mm and can be easily converted to the B-type for I-beams up to a maximum width of 300 mm. The trolley wheels are designed to ensure a maximum track fit, and lubricated sealed ball bearings ensure that the steel wheels work well.
• Trolleys are optionally available with fall and tilt protection.

Product options:

• Low headroom hoists for low spaces and specialised suspension trolleys for all types of lifting and transporting 
• Optional chain strap (fabric bag or metal box) 
• Explosion-proof options 
• Anti-corrosion options 
• 과부하 보호 
• Trolley fixing to prevent accidental slipping (especially suitable for shipboard use)

Ultra-Low Headroom Manual Trolley Hoist

The ultra-low headroom integrated push or pull trolley combination is an upgrade of the hoist series for even lower headroom requirements. 

제품 특징:

• Smooth and easy to operate, designed for special applications
• Lower frame can be raised below the track to greatly increase lifting speed and minimise construction costs
• Rounded wheel edges, widely applicable to I-beam, H-beam or other self-made rails.
• Trolleys are easy to install and adjust, and can be precisely adjusted to the width of the steel beam.
• Trolleys can be configured with fall and tilt protection. 

Product options:

• Low headroom hoists for low space applications and specialised trolleys are available for all types of lifting and transport.
• Optional chain strap (fabric bag or metal box)
• Explosion-proof option (ATEX)
• Corrosion-resistant option
• 과부하 보호
• Trolley fixing device to prevent accidental sliding (especially suitable for use on board ships)